Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roofing Company in Pasadena: What to Know First
Boral roof repair in Pasadena typically costs between $350 and $1,800 depending on the material, the failure point, and how much of the roof needs to be opened up. As an independent Boral service provider, Birchbark Roofing Pasadena handles repairs, replacements, and inspections on Boral concrete and clay tile, Boral steel, and Boral composite systems across Pasadena, with most repairs completed in a single visit. You’ll have the price in writing before we touch a single shingle.
If you own a Pasadena home with Boral roofing and you’re seeing cracked tiles, slipped pieces, or water staining at the eaves, this page tells you exactly what’s happening, what it costs, and how we work. Call (626) 657-5397 to schedule a walkthrough.
How Boral Products Fail – and How We Fix Them
Boral roofing holds up well in Southern California’s sun, but no roof material is immune to time, gravity, and Pasadena’s specific weather patterns. Here’s what we actually see on Boral roofs in this area:
- Cracked Boral concrete tile at the corners. Boral concrete tiles are dense and heavy, which means they’re sturdy until a branch drops or a work boot lands wrong. Corner cracks are the most common failure we see, especially on the thinner Boral profile lines installed in the 1990s and early 2000s. The fix: we pull the cracked tile, inspect the underlayment beneath it, and replace with a color-matched Boral tile when available or a quality aftermarket match when the original color has been discontinued.
- Slipped tiles on steep roof sections in the San Rafael Hills. Pasadena’s foothill neighborhoods, from Linda Vista to Hastings Ranch, have roofs with serious pitch in places. Older Boral installations that relied on nails instead of modern clips start to slip after a few decades of expansion and contraction. We reset slipped tiles and add proper wind clips where the original installation skipped them.
- Underlayment failure showing through as ceiling stains, not missing tiles. This is the one that surprises Pasadena homeowners. Boral tile itself can look fine from the street while the felt underneath, original to a roof from the 1980s or earlier, has turned brittle and begun to tear. Water gets past the tile, hits the aged underlayment, and stains the ceiling below. We see this constantly in Bungalow Heaven and Madison Heights, where craftsman homes carry origial Boral tile that’s long outlived the paper underneath it. The fix on these is a full remove, new underlayment, and re-set of the salvageable original tile. That’s a bigger job, but it’s the only one that actually stops the leak.
- Boral steel panel seam separation in flat or low-slope applications. Boral’s steel roofing lines hold up well in Pasadena’s dry heat, but we’ve repaired a number of standing-seam panels where the seams opened slightly after years of thermal cycling, particularly on south-facing exposures in the Arroyo Seco corridor. The fix is typically a seam re-crimp and touch-up coating, not a panel replacement, which keeps the cost far lower than a full re-roof.
- Broken ridge caps from Pasadena’s occasional wind events. The Santa Anas blow hard through the canyons in late fall, and ridge caps take the brunt of it. We keep a stock of Boral-compatible ridge caps and cement in our Pasadena trucks for exactly this reason. It’s typically a same-visit fix.
Styles & brands we work with






Our Boral Roofing Company Process
Here’s how a Boral repair or replacement goes when you call Birchbark Roofing Pasadena:
- 1
You call, a person answers. Not a voicemail tree. Erik Lindgren or a member of the crew hears what you’re seeing and schedules a time that works around your family’s schedule.
- 2
The inspection walk. We get on the roof and open the problem area if needed, camera in hand. We photograph what we find. You get the photos.
- 3
The written price. Before anyone picks up a tool, you have a line-item price in writing. No opens later. No surprises once the tile comes off.
- 4
The material decision. If a Boral tile needs replacing, we check availability for an exact match first. If the color is discontinued, we’ll show you the aftermarket match and tell you honestly whether it will read as different from the curb.
- 5
The work and the test. Shoe covers at the door. Drop cloths through the hallway if we need to access the attic. The repair gets done, then we check it. On leak repairs, we test with water before we pack up.
- 6
The cleanup photo. Before the crew leaves, one of us photographs the completed cleanup and the finished work. You see the proof before we go. The 365-Day Done Right Promise covers every repair we make.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roofing Company Costs in Pasadena
Most Boral roof repairs in Pasadena fall into these ranges:
- Single tile replacement (cracked or slipped Boral concrete tile): $350 – $650
- Ridge cap repair (broken or displaced caps, re-bedded with Boral-compatible cement): $400 – $800
- Flashing repair (Boral tile pulled, flashing replaced or re-sealed, tile re-set): $500 – $1,200
- Underlayment replacement under a section of Boral tile (tile removed, new underlayment, tile re-set): $1,500 – $3,500 depending on square footage and access
- Full Boral tile re-roof with new underlayment on a typical Pasadena home: $22,000 – $45,000 depending on roof complexity, tear-off, and tile availability
What moves the number: how many layers are coming off, whether the underlayment is original, roof pitch, and whether the Boral tile can be re-used or needs full replacement. Our estimate is always free, always written, and always in your hands before the job starts. Call (626) 657-5397 for an exact number on your roof.
Why Pasadena Homeowners Call Birchbark Roofing Pasadena for Boral Work
Boral roofs are heavy, specific systems that punish guesswork, and Pasadena has thousands of them, from the tile roofs of Bungalow Heaven to the newer steel and composite work in the hills. We’ve worked on Boral tile, steel, and composite systems across this city for close to three decades, and we know the difference between a tile issue and an underlayment issue, which is the difference between a $500 repair and a $3,000 repair that actually stops the leak.
We are part of the Cedarwell family of roofing companies since 2000, independently owned and operated here in Pasadena. Every job carries the 365-Day Done Right Promise. Every visit includes shoe covers, drop cloths, and a cleanup photo before we leave. If your Boral roof needs work, we stock what we can locally and place orders for the rest, and when a Boral product is discontinued, we can talk through alternatives from GAF, Owens Corning, and CertainTeed so you’re never locked into one brand’s reality.
FAQs
No. We’re an independent Boral service provider, not a Boral-authorized contractor. That said, most repairs we perform on Boral roofing are done with Boral-compatible materials and methods that keep the remainder of any existing manufacturer warranty intact. If your Boral roof is still under warranty, we’ll tell you honestly before any work starts whether the repair falls within warranty scope and what it would take to pursue a claim.
In many cases, yes. Boral concrete and clay tile colors remain available through roofing supply houses in the Los Angeles area, and we check exact availability for your color and profile before we quote. Some colors from the 1990s and earlier have been discontinued, and in those cases we’ll show you the closest aftermarket match and let you decide before any work begins. Call (626) 657-5397 and we’ll check your specific color during the inspection.
For single-tile or ridge-cap failures, we typically complete the repair the same day we arrive, as long as the tile is in stock locally. For underlayment replacement or larger section work, the timeline depends on weather, material availability, and roof size, but you’ll have a written schedule before the job begins. A person answers the phone 24/7, so call (626) 657-5397 any time to get your repair on the calendar.
We repair both. Boral steel panels and standing-seam systems show up on a lot of newer-build Pasadena homes, and we handle seam re-crimps, panel replacement, flashing repair, and coating touch-ups. Whether your Boral roof is tile, steel, or composite, we’ll inspect before we quote and give you the written price before any work starts.
If the tile or steel panels are still intact and the problem is isolated, repair makes sense. If the underlayment is original and you’re seeing repeated leaks in different rooms, the tile may be fine while the waterproof layer beneath it is finished, which means a re-roof with new underlayment and re-set tile is the honest fix. We’ll show you the evidence either way and give you both numbers in writing so the decision is yours. Call (626) 657-5397 to schedule the inspection.
Written by Erik Lindgren, Owner, Birchbark Roofing Pasadena at Birchbark Roofing Pasadena, serving Pasadena and nearby areas.